T-shirt


ACCELERATE MULTISAFE

T-shirt

21382-327

incl. VAT 152.46 EUR
excl. VAT 123.95 EUR
incl. VAT 152.46 EUR
excl. VAT 123.95 EUR
incl. VAT 152.46 EUR
excl. VAT 123.95 EUR
incl. VAT 152.46 EUR
excl. VAT 123.95 EUR
incl. VAT 152.46 EUR
excl. VAT 123.95 EUR
incl. VAT 152.46 EUR
excl. VAT 123.95 EUR
incl. VAT 199.20 EUR
excl. VAT 161.95 EUR
incl. VAT 199.20 EUR
excl. VAT 161.95 EUR
incl. VAT 259.47 EUR
excl. VAT 210.95 EUR
Product information
  • Anti-static and flame retardant.
  • Extra freedom of movement with elastic reflectors.
  • Tape over the sewing at the neck so the seam does not cause irritation.
  • Great protection with anti-static and flame-retardant properties.
  • Modern, close fit with good freedom of movement.
  • Suitable for industrial wash at max. 60 degrees.
  • Protects against the sun's harmful UV rays.
Premium. Anti-static and flame retardant. Fluorescent with oblique, transverse reflective strips. Modern fit. Neckband. Internal neck yoke. Rib at neck. Round neck. Two-toned.

This standard describes the requirements for the materials and design of electrostatic dissipative protective clothing which is used as part of a grounded system to prevent incendiary discharges. A product certified in accordance with EN 13758-2 provides documented protection against the sun's harmful UVA and UVB rays. The products are labelled with an Ultraviolet Protection Factor (UPF value), which corresponds to the protection capability. The protection capability is reduced if, for example, the product becomes worn out over time, the care instructions are not followed or if the clothing becomes wet. The only UPF that clothing can be labelled with is UPF 40+. Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing. High-visibility warning clothing for professional use X: Indicates product’s overall class, depending on the area of the fluorescent fabric and the area of reflective tape. Hi-vis Group B OEKO-TEX® STANDARD 100 - Confidence in textiles. Tested for harmful substances. Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing. This standard specifies the performance requirements for materials, material combinations and items of protective clothing with limited flame spread properties in order to reduce the likelihood of the clothing catching fire and thereby constituting a hazard. The standard indicates the protection as a class between one and three, where three represents the best protection.

Materials

44% modacrylic/28% cotton/26% polyester/2% carbon fibres

Treatment & Certificates

Do not dry-clean Do not bleach Iron at low temperature, max. 110° C Tumble-dry - initial temperature max. 60° C Warm wash, max. 60° C

Features

Mix&Match