14 - hi-vis orange
24335-231-14
Winter Jacket
ACCELERATE SAFE
Winter jacket
Product information
- Breathable, wind and waterproof with taped seams.
- Flap on back of jacket can be folded up for standard back length or released for extended back.
- The zip fastener has a double storm flap to provide extra protection against bad weather.
- Unique CLIMASCOT® insulation provides warmth without bulk. Lightweight, soft CLIMASCOT® insulation takes up almost no space when compressed.
Technical text
- Chest pocket with a zip.
- CLIMASCOT® Lightweight Insulation.
- Cuffs with elastic.
- Detachable lined hood with adjustable drawstring.
- Fastening with zip and double storm flap.
- Flap on back of jacket can be folded up for standard back length or released for extended back.
- Fluorescent with vertical and horizontal reflective tape.
- Front pockets with a zip.
- High collar.
- Inner pockets - two with zips and one open mesh.
- Rib inside the bottom trim on the front of the jacket.
- Taped seams.
- The fabric is highly durable, breathable, wind and waterproof.
- Zip at lower back for logo printing/ embroidery.
Properties



Certifications
Logo
You should choose a transfer that can be heated to a maximum of 145 degrees when being printed onto the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with a maximum logo area of (M-5XL) 0,0200 m², (XS-S) 0,2500m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Placements:
- Workwear logo. Over left breast pocket. Max 8x3 cm/3.1x1.1 inches
- Workwear logo. Left breast pocket. Max 8x7 cm/3.1x2.7 inches
- Workwear logo stretch. Right breast. Max 8x6 cm/3.1x2.3 inches
- Workwear logo. Over right breast pocket. Max 8x3 cm/3.1x1.1 inches
- Workwear logo. Mid-back. Max 25x25 cm/9.8x9.8 inches
- Workwear logo. Special placement. Contact to discuss further
Treatment & Certificates
Social and Environmental Responsibility
- Lining fabric, CLIMASCOT®, is made from 35% recycled polyester
- The product is covered by REACH and has the OEKO-TEX® STANDARD 100 certificate number 5548, certified by Shirley.
- All fabric and all accessories are bought by MASCOT directly from suppliers
- Sewn at MASCOT’s own factory in Vietnam
- Sewn in a SA8000-certified factory, which is proof of good, safe employee and working conditions
- Product packaging is made from waste from plastic production
- Transported from production to warehouse by transport partners who are ISO 14001-certified
- Transported in shipments that make maximum use of space
- The order from MASCOT is packaged in packaging which is made from or contains recycled materials
















