Winter Boilersuit

ACCELERATE SAFE

Winter boilersuit

Product information

Breathable, wind and waterproof with taped seams.

Ergonomically shaped trouser legs are constructed to follow the body's natural movements.

Ruler pocket with Kevlar® reinforcement - particularly resistant to pointed and sharp objects.

Snow locks inside the leg to keep snow and dirt out.

Unique CLIMASCOT® insulation provides warmth without bulk. Lightweight, soft CLIMASCOT® insulation takes up almost no space when compressed.

Very durable.

Technical text

Back pockets with reinforcement and flaps.
Belt loops.
Chest pocket with waterproof zip.
CLIMASCOT® Lightweight Insulation.
Detachable ID card holder.
Detachable lined hood with adjustable drawstring.
Elastic at cuffs.
Elastic at the waist.
Ergonomically formed trouser leg.
Fastening with two-way zip, storm flap and press studs.
Fluorescent, with oblique transverse reflective strips.
Front pockets.
Hidden tool straps on both sides.
High collar.
Inner pockets - two with zips and one open mesh.
Ruler pocket with Kevlar® reinforcement.
Snow flap on the inside of leg.
Taped seams.
The fabric is highly durable, breathable, wind and waterproof.
Thigh pocket with lined phone pocket and magnet fastening.
Thigh pockets with flaps.
With print effects.
Zip at lower back for logo printing/ embroidery.
Zip with storm flap on inside of lower legs.

Properties

Certifications

Logo

You should choose a transfer that can be heated to a maximum of 145 degrees when being printed onto the product. Remember to check the washing instructions for the chosen transfer before washing the product.

The product is certified with a maximum logo area of 0,8400m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.

Placements:

Workwear logo. Over left front pocket. Max 11x6 cm/4.3x2.3 inches
Workwear logo. Over right front pocket. Max 11x6 cm/4.3x2.3 inches
Workwear logo stretch. Left breast pocket. Max 8x7 cm/3.1x2.7 inch
Workwear logo stretch. Right breast pocket. Max 8x7 cm/3.1x2.7 inch
Workwear logo stretch. Mid-back. Max 20x20 cm/7.8x7.8 inches
Workwear logo stretch. Left back pocket. Max 11X4 cm/4.3x1.5 inches
Workwear logo stretch. Right back pocket. Max 11X4 cm/4.3x1.5 inches
Workwear logo stretch. Vertical on left thigh, read from the bottom upwards. Max 20x5 cm/7.8x1.9 inches
Workwear logo stretch. Vertical on right thigh, read from the top downwards. Max 20x5 cm/7.8x1.9 inches
Workwear logo stretch. Horizontal on right thigh. Max 9X6 cm/3.5x2.3 inches
Workwear logo stretch. Horizontal on left thigh. Max 9X6 cm/3.5x2.3 inches
Workwear logo stretch. Horizontal on right sleeve. Max 10x5 cm/3.9x1.9 inches
Workwear logo. Special placement. Contact to discuss further